Data trapped inside every machine
CNC, PLC and sensor each hold their own numbers in their own format, with no shared language and no way out unless someone builds one.
Industrial IoT & Machine Monitoring
Connect every machine.
Connect every machine.
Trust every number
Tap any make, age or protocol and turn raw signals into live OEE, utilisation and reason-tagged downtime. No rip-and-replace.
The problem
Every machine speaks
Every machine speaks
a language of its own
Machines were never built to talk to each other, so the numbers your floor produces stay locked inside each one.
Numbers copied by hand, too late to use
A supervisor walks the floor, writes counts on paper, and someone re-types them into a spreadsheet. By the time anyone reads it, the shift is over.
A separate island for every vendor
Each machine builder ships its own portal and its own login, so the plant ends up with a dozen disconnected views and no single picture of the floor.
Older assets assumed unconnectable
A machine bought before controllers reported data gets written off as too old to monitor, so it runs unseen while newer lines get all the visibility.
The answer
Everything the shop floor needs, connected
One platform reads every machine's own language and turns it into the visibility, efficiency and operational control your teams act on, in real time.
Live Machine Monitoring
Know the real-time status of every asset, whether running, idle, stopped or in setup, captured automatically with no manual logging.
OEE Tracking & Loss Analysis
See availability, performance and quality by machine, line and shift, with loss analysis that pinpoints where your output slips.
Downtime Classification & Alerts
Catch every stop, tagged by reason in real time, with instant alerts so the right person acts before it costs you a shift.
Production Tracking & Dashboards
Track output against target, part counts and job progress, live on clean dashboards for everyone who needs them.
Data-Driven Decision Making
Turn raw signals into the KPIs that matter, so you decide on live data, not yesterday's reports.
Role-Based Access Control
Give every role the right view. Operators, supervisors and management each see what matters to them, securely.
One connected view
Everything on the floor,
Everything on the floor,
in one intelligence layer
Sample data, shown to illustrate the layout.
Live machine monitoring
Every asset classified automatically, whether running, idle, stopped or in setup, with utilisation and OEE you can trust, streamed second by second.
0
Real-time
No manual logging, ever.
ERP / MES
Open APIs push live data both ways.
Reason-tagged downtime
Every stop captured and classified the moment it happens, ranked by cost, so you fix the losses that matter.
Role-based access
Operators, supervisors and management each see exactly what matters to them, securely.
How we work
From machine to dashboard
Connect
Edge hardware taps your controllers and sensors securely, with no production stoppage.
Integrate
Open APIs and standard protocols push clean data into your ERP, MES and BI tools.
Act
Live dashboards and alerts put the right number in front of the right person, instantly.
Connect anything
Any make. Any age. Any protocol
Out-of-the-box drivers for the controllers and standards already on your floor, with no gateways to hand-build and no vendor lock-in.
CNC & controllers
Fanuc FOCAS, Siemens S7, Mazak, Haas, Mitsubishi.
PLCs
Allen-Bradley, Delta, Modbus TCP, EtherNet/IP.
Standards
OPC-UA and MQTT, the open backbone of IIoT.
Retrofit sensors
Vibration, current, temperature for legacy assets.
OPC-UAMQTTModbus TCPEtherNet/IPSiemens S7Fanuc FOCASAllen-BradleyMitsubishiDeltaMazakHaasPLCCNCSensorsOPC-UAMQTTModbus TCPEtherNet/IPSiemens S7Fanuc FOCASAllen-BradleyMitsubishiDeltaMazakHaasPLCCNCSensors
SAPOracle ERPDynamics 365MESPower BITableauREST APIWebhooksMQTT BrokerExcel ExportSAPOracle ERPDynamics 365MESPower BITableauREST APIWebhooksMQTT BrokerExcel Export
Integrations
Reading the floor is half of it.
Reading the floor is half of it.
The other half is what you do next
Machines, sensors and protocols come in one side. Clean, contextual production data goes out the other, into the ERP, MES, reporting and alerting your teams already work in. APMS sits between the two, so the floor stops being a system nobody else can read.
In from the floor
Controllers, retrofit sensors and open standards, polled continuously and normalised into one model, whatever the make or the age of the asset.
Out to your systems
Live production, downtime and quality pushed on an open API, so your ERP, MES and BI read the same numbers your control room does, at the same moment.
Industrial IoT
Your whole floor, connected and understood
APMS Industrial IoT connects every machine on your floor, new or decades old, and turns raw signals into live, trustworthy intelligence. No manual logging, no rip-and-replace, no disconnected vendors.
Connect any machine
CNC, PLC, robots, standalone sensors, even PLC-less assets. Any make, any age, any protocol, all onto one platform.
HMI, on-site and secure
Rugged HMI hardware taps your controllers and sensors securely, with no production stoppage and no rip-and-replace.
One real-time data model
Every signal cleaned, normalised and unified into a single source of truth, live to the second across the whole plant.
OEE and loss analysis
Availability, performance and quality by machine, line and shift, with every loss ranked by what it actually costs you.
Dashboards, alerts and app
Live on any device and role-based, from control room to phone, with alerts the moment reality drifts from plan.
Open integration
Push clean, contextual data into your ERP, MES and BI tools through open APIs and standard industrial protocols.
Industrial IoT
FAQs
Yes. Where a controller can't be tapped directly, retrofit sensors for vibration, current and temperature capture machine state, so even the oldest equipment joins the same live view.
Availability × Performance × Quality, computed automatically from live machine state, cycle data and quality results, broken down by machine, line and shift, with loss analysis you can act on.
No. APMS reads machine state passively at a secure edge. It does not write to or control your equipment, and connection happens with no production stoppage.
Absolutely. The platform scales from single-machine monitoring to enterprise-wide across multiple lines and plant locations. Start small and expand when you're ready.
See your machines live
Book a demo and watch your own assets light up on an APMS dashboard.